Myf - 30 Model Rearing Cage

The first class galvanized sheets and wires we use to create the structure of our cages are ISO 9001 certified. Galvanization, which we use in the structure and partitions of the cages, aims to prevent mold and rust from the materials and to  extend the service life.  Our company has achieved the most efficient rate of galvanizing usage through the testing of research and development engineers and has started using it in its products..

Our Cage Cells

Our cell sizes are specially designed to provide the chickens in the movement area and to ensure their comfort.

 In order to provide easy access to the chickens, horizontal sliding covers are used which can be opened with one hand.  In this way, it aims to save time and labor.

 Our cell dimensions are 1230 mm long x 650 mm wide.

  •  The height of our cells is 600 mm.
  •  The distance between the base wire of the lower floor and the floor is 350 mm.
  •  Using the adjustment bolt in the leg section of the cage, can be adjusted to a height of 60 mm.
  •  The intermediate wires we use to separate the cells are designed to allow the circulation of light and air.

Watering System

In our cage, there is a crane system that can be adjusted to allow the chicks to reach the drinking line easily, it is made using 4 nipples, 2 of which are fixed (2 inoxydables nipples) and 2 inoxydables nipples movable up to 360⁰ on "PVC" pipes passing through the middle part of the side separation plates of the cage.  Using the bowls under each nipple, excess water is prevented from reaching the manure band.

Feeding System

Chicks should be fed hygienically and properly until they reach maturity and have easy access to feed.  Thanks to the feeding plate in our cage cells, chicks can easily access feed.  The feeding truck system we use in rearingcages allows feed to be distributed evenly, quickly and evenly in all lines and floors of the cage.  This system is controlled by the control switches on the cage heads.  These switches are controlled by the electrical panel to which they are connected.

Manure Removal System

Manure is transported through the polypropylene manure band, which is located under each floor and runs along the cage.  This transfer takes place thanks to the motors.  Manure is evacuated using rubber balls in the block heads.  The surface of the band is cleaned with the scrapers located at the end of the floors.  These operations are carried out by the electrical panel.